Clock Timezone - HP 6125XLG Command Reference Manual

week—Represents week of the month. It takes first, second, third, fourth, fifth, or last.
day—Takes Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday.
add-time: Specifies the time to be added to the standard time, in the format hh:mm:ss. The hh value is in
the range of 0 to 23, the mm value is in the range of 0 to 59, and the ss value is in the range of 0 to 59.
The leading zero in a segment can be omitted. If the seconds segment is 0 (hh:mm:00), you can omit it.
If both the minutes and seconds segments are 0 (hh:00:00), you can omit both of the segments. For
example, to specify 08:00:00, you can enter 8.
Usage guidelines
When the system time source is the local system time, the daylight saving time determines the system time
together with the UTC time and local time zone. You can use the display clock command to view the
system time.
A correct system time setting is essential to network management and communication. Set the system time
correctly or use NTP to synchronize your device with a trusted time source before you run it on the
network.
Examples
# Set the system time ahead 1 hour for the period between 06:00:00 on 08/01 and 06:00:00 on
09/01.
<Sysname> system-view
[Sysname] clock summer-time PDT 6 08/01 6 09/01 1
Related commands
• clock datetime

clock timezone

•
display clock
•
clock timezone
Use clock timezone to set the local time zone.
Use undo clock timezone to restore the default.
Syntax
clock timezone zone-name { add | minus } zone-offset
undo clock timezone
Default
The local time zone is the UTC time zone.
Views
System view
Predefined user roles
network-admin
Parameters
zone-name: Specifies a time zone by its name, a case-sensitive string of 1 to 32 characters.
add: Adds a specified offset to the UTC time.
146