HP 6125XLG Command Reference Manual page 46

Views
User interface view
Predefined user roles
network-admin
Parameters
role-name: Specifies a user role name, a case-sensitive string of 1 to 63 characters. The user role can be
predefined (network-admin, network-operator, or level-0 to level- 1 5) or user-defined. If you do not specify
this argument for the undo user-role command, the command restores the default user role.
Usage guidelines
This command is not supported in FIPS mode.
You can assign up to 64 user roles to a user interface. A user logged in to the user interface gets all the
user roles.
For more information about user roles, see Fundamentals Configuration Guide.
Examples
# Assign user role network-admin to user interface VTY 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] user-role network-admin
39