Free User-Interface - HP 6125XLG Command Reference Manual

Examples
# Configure software flow control in the inbound and outbound directions for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] flow-control none

free user-interface

Use free user-interface to release a user interface.
Syntax
free user-interface { number1 | { aux | console | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
number1: Specifies the absolute number of a user interface, in the range of 0 to 35.
aux: Specifies the AUX user interface.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
number2: Specifies the relative number of a user interface, in the range of 0 to 9 for a console/AUX
interface or 0 to 15 for a VTY user interface.
Usage guidelines
This command does not release the connection you are using.
Examples
# Release user interface VTY 1:
1. Display which users are operating the device.
<Sysname> display users
Idx
10
+ 11
Following are more details.
VTY 0
VTY 1
+
F
2. If the operations of the user on VTY 1 impact your operations, log out the user.
<Sysname> free user-interface vty 1
Are you sure to free user-interface vty1? [Y/N]:y
UI Idle
VTY 0 00:10:49
VTY 1 00:00:00
:
Location: 192.168.1.12
:
Location: 192.168.1.26
: Current operation user.
: Current operation user works in async mode.
Time Pid
Jun 11 11:27:32 320
Jun 11 11:39:40 334
23
Type
TEL
TEL