Function Table; Parameter Setting Procedure - A&D HW-10KGL Instruction Manual

15. Function Table

The function table is used to store and refer items that determine the performance of
the scale. Each item has a parameter.
The parameters are stored in the scale even if the power is removed.

15.1. Parameter Setting Procedure

Step 1 Turn off the display.
Press and hold the
The function table is displayed.
Step 2 Set parameters for each item using the following keys.
key
∧
key
＜
key
F
key
ENTER
Step 3 When the end of the table is reached,
displayed.
Step 4 Press the
return to the normal weighing mode.
HV-G/HW-G Series
key and press the
ZERO
Selecting the parameter of an item.
Selecting a figure.
Proceeding to step 3 without storing the
parameter.
Storing a parameter for the current item
and proceeding to the next item.
key to store the new parameters and
ENTER
key.
ON/OFF
is
end
Page 51 15. The Function Table