Options; Extension Load Cell Cable (Op-02) - A&D HW-10KGL Instruction Manual

17. Options

17.1. Extension Load Cell Cable (OP-02)

This cable is used for installing the indicator away from the base unit.
This extension load cell cable is 5 m long.
Refer to " 5.3. Removing the Pole" for how to remove the pole.
Caution
Calibrate the scale after connecting this cable.
Do not connect more than two extension load cell cables.
For models with weighing capacity of 10 kg to 200 kg
17. Options Page 64 HV-G/HW-G Series