A&D HW-10KGL Instruction Manual page 40

Step 5 If either of
selected, press the
comparator.
Step 6 Press the
Step 7 Set the upper limit value using the following keys.
key
＜
key
∧
key
F
Step 8 Press the
display the blinking LO.
Step 9 Set the lower limit value using the following keys.
key
＜
key
∧
key
F
Step 10 Press the
return to the normal weighing mode.
If the lower limit value is greater than the upper limit
value, the scale returns to step 7.
11. Upper/Lower Comparator Function
, , ,
f6 0 f6 2 f6 4 f6 6
key to use the
SET
key to display the blinking HI.
MODE
Selecting the figure to be changed.
Changing the number of the figure.
Selecting the polarity (+,-).
key to store the new parameter and
ENTER
Selecting the figure to be changed.
Changing the number of the figure.
Selecting the polarity (+,-).
key to store the new parameter and
ENTER
has been
Page 38 HV-G/HW-G Series