A&D HW-10KGL Instruction Manual page 30

Description
The status of "Inactive comparator (
) is selected and this comparator is not used. The comparator can be selected to
f6 6
be ON or OFF using the SET key alternately.
The following parameters are stored in the same memory. Therefore these functions
can not be used at the same time. If you use each function, select the function in the
function table, set the parameters (HI,OK and LO) and weigh.
Upper/Lower Comparator Function (
Simple Batch Function (
Full/ Dribble Batch Function (
7. Basic Operation
)" is that comparator function (
f6
to
f6 0 7
)
f6 8
)
f6 9
Page 28
Indicator and Output
HI
) Upper limit
Final Preliminary
value value
Final Preliminary
value value
, ,
f6 0 f6 2 f6 4
OK LO
Lower limit
Zero band
Zero band
HV-G/HW-G Series
,