Step 8 Press the
final value).
Step 9 Set the final value using the following keys.
key
<
key
∧
Step 10 Press the
display the blinking OK (of preliminary value).
Step 11 Set the preliminary value using the following keys.
key
<
key
∧
Step 12 Press the
display the blinking LO (of zero band).
Step 13 Set a zero band which is greater than the tare value,
using the following keys.
key
<
key
∧
Step 14 Press the
return to the normal weighing mode.
HV-G/HW-G Series
key to display the blinking HI (of the
MODE
Selecting the figure to be changed.
Changing the number of the figure.
key to store the new parameter and
ENTER
Selecting the figure to be changed.
Changing the number of the figure.
key to store the new parameter and
ENTER
Selecting the figure to be changed.
Changing the number of the figure.
key to store the new parameter and
ENTER
Page 43
12. Full/Dribble Batch Function