Counting Mode; Storing A Unit Mass - A&D HW-10KGL Instruction Manual

8. Counting Mode

The counting mode is the function to convert the total mass value (total weight) of
articles to a count, when each article has the same mass value.
To use this function, store a unit mass in advance.
Even if the AC adapter or the batteries is removed, the unit mass is maintained in
non-volatile memory.
8.1.
Step 1 Press the
Step 2 Press the
unit mass.
Step 3 Press the
The greater the quantity of samples, the greater the
accuracy of the count.
5 pieces, 10 pieces, 20 pieces, 50 pieces,
100 pieces
Step 4 Place the container on the pan.
Press the
Step 5 Place the number of samples selected at step 3.
Wait for the stability mark to be displayed. Press the
key to store. The count is displayed.
ENTER
Caution
When the sample total mass value is too small and
it is not possible to calculate a unit mass, the scale
lo ut
displays
number of samples. More than 5 digits of the total
sample mass, in the unit of kg, are required.
When the unit mass is too light to store, the scale
lo ut .
displays
stored even if the number of samples is increased.
Pressing the
displayed, displays the next unit.
Step 6 Remove the samples and the container from the pan.
HV-G/HW-G Series

Storing a Unit Mass

key to display the unit
MODE
key to enter the mode that stores a
SET
key to select the number of samples.
∧
key.
TARE
and returns to step 3. Increase the
In this case, the unit mass will not be
key, after
ENTER
.
lo ut
is
Page 29
8. Counting Mode