Tare (And Net Display); Tare Input By Weighing; Digital Input (Preset Tare) - A&D HW-10KGL Instruction Manual

Hv-g/hw-g series digital platform scale

Hide thumbs Also See for HW-10KGL:

Instruction manual (71 pages)

Instruction manual (71 pages)

Table Of Contents

Table of Contents

7.2.

The "tare" is used to cancel the mass of a container, which is placed on the pan to

contain the article to be weighed.

Caution

The tare reduces the weighing range.

The current tare value is reset by pressing the

off. (Reset value is zero.)

The storable preset tare value must be within the minimum weighing range for

the HV-G series.

7.2.1. Tare Input by Weighing

Step 1 Place the container on the pan.

Step 2 Wait for the stability mark to be displayed. Press the

becomes zero and the net mark is displayed.

Step 3 Place an article to be weighed into the container. Wait for the stability mark to be

displayed and read its net display.

Step 4 Remove the article and the container from the pan.

7.2.2. Digital Input (Preset Tare)

Step 1 Press and hold the

Then the blank or stored tare value is displayed. The blank display means that the

tare value is zero (reset value). And

Step 2 Set the preset tare value using the following keys.

key

＜

key

∧

Step 3 Press the

Then the scale displays the net value (the gross weight value minus the tare value).

Step 4 Place an article to be weighed into the container. Wait for the stability mark to be

displayed and read its net display.

Step 5 Remove the article and the container from the pan.

HV-G/HW-G Series