A&D HW-10KGL Instruction Manual page 10

Options List
OP-02 Extension load cell cable (For weighing
capacity of 10 kg to 200 kg)
Extension load cell cable (For weighing
capacity of 300 kg to 1200 kg)
OP-03 RS-232C interface/ Relay output/ Buzzer
OP-04 RS-422/485 interface/ Relay output
OP-06 Built-in printer for type V
OP-11 Wall mounting kit
OP-13 Roller conveyor for HV-200KG, HW-100KG and HW-200KG
OP-14 Roller conveyor for HV-60KG and HW-60KG
OP-15 Display unit stand (The display is not included)
For HW-300KGL4, HW-300KGV4, HW-600KGL4 and HW-600KGV4
For HW-600KGL3, HW-600KGV3, HW-1200KGL3 and HW-1200KGV3
OP-16-3 Wheel for HW-600KGL3, HW-600KGV3, HW-1200KGL3 and HW-1200KGV3
OP-16-4 Wheel for HW-300KGL4, HW-300KGV4, HW-600KGL4 and HW-600KGV4
OP-17 Stainless steel cover for HW-600KGL3, HW-600KGV3, HW-1200KGL3
and HW-1200KGV3
OP-18-3 Roller conveyor for HW-600KGL3, HW-600KGV3, HW-1200KGL3 and
HW-1200KGV3
OP-18-4 Roller conveyor for HW-300KGL4, HW-300KGV4, HW-600KGL4 and
HW-600KGV4
AX-KO577A-200 RS-232C cable, D-sub 25 pin, 2 m
AX-KO1786-200 RS-232C cable, D-sub 9 pin, 2 m
AX-KO577A-200
Note OP-16 and OP-17 are factory-installed.
For handling OPs-11, 13, 14, 15, 16, 17 and 18, refer to the relevant option manual.
Consumables
AX-PP156-S
AX-ERC-05-S
3. Unpacking
Order code / Option name
Special roll paper (10 rolls)
Ink ribbon (5 ink ribbons)
AX-KO1786-200
Page 8
Accessories
Tapping screw M4x10
Connector JA:TCP0586
Connector TM:BLA9
AC adapter
Paper PP156
Ink ribbon ERC-05
HV-G/HW-G Series
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A