Preparation (Setting Parameters) - A&D HW-10KGL Instruction Manual

Function table
f6 7
Caution
The upper limit value (HI) must be greater than the lower limit value (LO).
The parameters of the upper limit value (HI) and the final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the
preliminary value (OK) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use the common memory.

11.1. Preparation (Setting Parameters)

Step 1 Turn off the display.
Press and hold the
key. The function table is displayed.
Step 2 Press the
comparator function (
Step 3 Select a parameter of the comparator function
( to
f6 0
Step 4 Press the
Press the
weighing mode.
HV-G/HW-G Series
When the weight value becomes stable and not nearly-zero, the
scale compares the value. It does not compare on an unstable
condition.
key and press the
ZERO
key to display an item of the
ENTER
).
f6
) with the
f6 7
∧
key and the
ENTER
key to return to the normal
ENTER
Description
ON/OFF
key.
key to display end .
F
11. Upper/Lower Comparator Function
Page 37
A
A
A