Basic Operation; Turning The Scale On/Off And Weighing; Type V Or Type L With Ac Adapter - A&D HW-10KGL Instruction Manual

7. Basic Operation

7.1.

7.1.1. Type V or Type L with AC Adapter

Step 1 Ground the scale.
Step 2 Confirm that nothing is placed on the pan.
Step 3 Confirm that local voltage and receptacle type are correct.
Step 4 The scale turns on/off using the
Step 5 Check the accuracy of weighing. Allow 30-minute warm up before calibration.
Step 6 With nothing on the pan, press the
Step 7 Place an article to be weighed on the pan gently.
Step 8 Wait for the stability mark to be displayed. Read the weight value.
Step 9 Remove the article from the pan.
Step 10 Turn the scale off using the
Memo
With the power cord connected, type V is in standby status after the scale is turned off
using the
ON/OFF
cord.
With the AC adapter connected, the power is off at the scale, but not from the AC
adapter, after the scale is turned off using the
completely, disconnect the AC adapter.
HV-G/HW-G Series

Turning the Scale on/off and Weighing

key. To shut down the power completely, disconnect the power
key alternately.
ON/OFF
key to display zero.
ZERO
key.
ON/OFF
ON/OFF
Page 23
key. To shut down the power
7. Basic Operation