A&D HW-10KGL Instruction Manual page 57

Item Display
Hold
f12 0 # Not used
f12 1
f12 2
f13 0 # Fast response, sensitive value
Averaging
f13 1
f13 2
f14 0 # Stores a unit mass in the unit of a digit.
Precision
of unit
f14 1
mass
f14 2
f15 0 # Format 1 (A&D general format for scales, balances)
Format
f15 1
f15 2
f15 3
Number of
carriage f16 0
return for f16 1 #
the printer
to
f16 9
f17
Date
000000 #
others
"#": factory settings
The "nearly-zero" is within ±5 digits from zero point in the unit of kg.
The "digit" is a unit of display, and is equivalent to the minimum measurable mass.
HV-G/HW-G Series
Selects the method to hold the current weight value. When the
weight value becomes nearly-zero or changes more than 25%
+30 digits, hold display is canceled.
The hold function is ON or OFF alternately by the
When the stability mark is displayed, the display is held.
Selects readability and response.
Slow response, stable value
Selects a storable minimum unit mass in the counting mode.
Stores a unit mass in the unit of one eighth digit.
Stores a unit mass, if the total of sample mass is greater than 5
digits.
Refer to "16.1. Data Format".
Format 2 (Older HV-A/ HW-A format)
Not used
Format 1 (Return command is available for all commands.)
Used when Type V scale is equipped with option OP-06, a
built-in impact dot matrix printer.
Selects the number of carriage return after the data is printed.
Option OP-06 for type V is required.
Use Printout of date. Caution Date is not updated.
Printout of the management number for the scale.
The function number "f17" is not displayed.
No printout
The relation between printout and display is as follows:
Display
Printout
Page 55
Description
990721
99/07/21
key.
F
15. The Function Table
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ