Type L With Batteries - A&D HW-10KGL Instruction Manual

7.1.2. Type L with Batteries

Step 1 Install six new batteries. Refer to "5.2. Installing the Batteries for Type L".
Step 2 Confirm that nothing is placed on the pan.
Step 3 The scale turns on/off using the
Step 4 Check the accuracy of weighing. Allow 30-minute warm up before calibration.
Step 5 With nothing on the pan, press the
Step 6 Place an article to be weighed on the pan gently.
Step 7 Wait for the stability mark to be displayed. Read the weight value.
Step 8 Remove the article from the pan.
Step 9 Turn the scale off using the
Caution
Replace used batteries with six new ones when
Battery life depends on the ambient temperature.
Remove the batteries from the display unit when the scale is not to be used
for a long time. The batteries may leak and cause damage.
7. Basic Operation
key alternately.
ON/OFF
key to display zero.
ZERO
key.
ON/OFF
Page 24
is displayed.
HV-G/HW-G Series