Keys - A&D HW-10KGL Instruction Manual

isplay and Symbols
D
e.g. CAP. MAX. 3/6/15kg d=1/2/5g
6.2.
Display and Symbols
HV-G/HW-G Series
Calibration error
The calibration mass is too heavy.
Check the base unit and the weighing pan.
Does not display zero when the scale is turned on.
Remove anything that is on the weighing pan.
Perform zero point calibration.
Or
The weight value is unstable due to drift or vibration
when the scale is turned on.
A
measurement.
Check around the weighing pan.
Accumulated data count
Total mass value of the accumulated data
Comparator function: upper limit value
Full/dribble batch function: final value
Full/dribble batch function: preliminary value
Comparator function: lower limit value
Full/dribble batch function: zero band
The weighing range and measurable minimum mass.
Example: Displays the weight value by 5 g up to 15 kg.

Keys

ON/OFF key
Note Type V is in standby status when power is connected.
ZERO key
When the
scale displays the mass value of zero and the zero point mark.
Net is canceled, if it is displayed.
TARE key
Canceling the mass of a container which is placed on the pan
and does not weigh its mass.
SAMPLE key, RANGE key, key
Changes the weighing range for HV-G series.(Refer to
f2 )
Storing the unit mass: used to select the number of samples.
Description
breeze or vibration
Displays the weight value by 2 g up to 6 kg.
Displays the weight value by 1 g up to 3 kg.
Description
key is pressed with nothing on the pan, the
ZERO
Page 21
may be affecting
6. Description of Each Part
A
A
A
A
A
A
A
A
A
the
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A