Caution
The parameters of the upper limit value (HI) and a final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the
preliminary value (OK) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use the common memory.
13.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press and hold the
The function table is displayed.
Step 2 Press the
comparator function (
Step 3 Select a parameter of the simple batch function
(
) with the
f6 8
Step 4 Press the
Step 5 Press the
mode.
HV-G/HW-G Series
key and press the
ZERO
key to display an item of the
ENTER
).
f6
key.
∧
key and the
ENTER
key to return to the normal weighing
ENTER
key.
ON/OFF
key to display end .
F
Page 45
13. Simple Batch Function