A&D HW-10KGL Instruction Manual page 22

Display and Symbols
The "digit" is a unit of display, and is equivalent to the minimum measurable mass.
The " nearly-zero " or zero band is within ±5 digits from zero point in the unit of kg.
6. Description of Each Part
Counting mode (Example)
This mode uses the stored unit mass and counts the
number of articles on the pan. The unit is
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 20 pieces of samples.
The zero value means that no articles are on the pan.
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 10 pieces of samples.
Sign "-" means that something is placed on the pan.
Percentage mode (Example)
This mode uses the stored 100% mass and converts the
weight value to a percentage. The unit is %
Function table (Example)
This function table sets parameters of items.
key
ENTER
∧ and ＜keys
key
ENTER
Preset tare. Entering tare with digital input (Example)
＜ key
∧ key
key
ENTER
Hold display (Example)
The hold display is set using f12 of the function table.
When the weight value is "nearly-zero" (within the zero
band) or changes more than 25% +30 digits, the hold is
canceled.
Weighing error
Check the base unit and the weighing pan.
Overload display
Remove anything that is on the pan.
Calibration error
The calibration mass is too light.
Check the base unit and the weighing pan.
Page 20
Description
Selecting an item.
Selecting a parameter of the item.
Storing new parameters.
Selecting the figure to be changed.
Changing the number of the figure.
Storing the new tare.
A
A
A
A
.
A
A
A
A
A
A
A
A
A
A
A
A
.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
HV-G/HW-G Series