Tray Paper Settings - Ricoh 5100WD General Settings Manual

Tray Paper Settings

This section describes the user tools in the Tray Paper Settings menu under System Settings.
Default settings are shown in bold type.
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is Tray 1.
When optional cut paper tray is installed, the default setting will be Tray 3.
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
Tray Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray.
[Tray Paper Size: Tray 3] and [Tray Paper Size: Tray 4] appear only when the optional paper roll
tray or cut paper tray is installed.
• When paper roll tray is installed
Metric version:
• A Series:
A0 Width (841 mm), A1 Width (594 mm), A2 Width (420 mm), A3 Width (297 mm), A4
Width (210 mm)
• JIS B Series:
B1 JIS Width (728 mm), B2 JIS Width (515 mm), B3 JIS Width (364 mm), B4 JIS Width
(257 mm)
• Others:
880 mm, 800 mm, 707 mm, 680 mm, 660 mm, 625 mm, 620 mm, 490 mm, 440 mm
Inch version:
• Engineering:
34 inch, 22 inch, 17 inch, 11 inch, 8
• Architecture:
36 inch/914 mm, 24 inch, 18 inch, 12 inch, 9 inch
• Others:
1
/ inch
2
Tray Paper Settings
2
55