Logo Registration; Driver Compatibility; Usb Power-Saving Function; Maintenance Counter - Epson TM-T70II Technical Reference Manual

Hide thumbs Also See for TM-T70II:

Table of Contents

Logo Registration

The TM-T70II can register logos in the NV memory (NVRAM) with the TM-T70II Utility, while the TM-T70

can register logos with the TM Flash LOGO Setup Utility for NVRAM (TM-Flogo).

For detailed information about the TM-T70II Utility, see the TM-T70II Utility User's Manual.

You can operate the TM-T70II with a driver for the TM-T70 (APD Ver.3xx or later or APD Ver.4.54 or later).

You cannot operate the TM-T70 with a driver for the TM-T70II.

Advanced Printer Driver

When the TM-T70 was controlled by APD Ver. 4.00 ~ 4.53, you need to install APD Ver.4.54 or later versions.

OPOS ADK

If the TM-T70 was controlled by an OPOS ADK, you can replace it with the TM-T70II without modifying the

OPOS ADK.

With the TM-T70II, you can enable the USB power-saving function with the memory switch.

For the TM-T70II, "Number of lines fed (when the print head was replaced)" is added.

For an application that can beep an internal buzzer of the TM-T70, the application can also beep an internal

buzzer or optional external buzzer of the TM-T70II without any changes of the application. TM-T70II is

available with an internal buzzer or without the buzzer. Even if you purchase the one without the buzzer, you

can attach an optional external buzzer. You can beep the buzzer with the pulse signal using a command. (See

"Setting the Internal Buzzer (for Models with an Internal Buzzer)" on page

External Buzzer" on page

42.)

For detailed information about ESC/POS commands, see the ESC/POS Command Reference.

Chapter 6 Replacement of the TM-T70

46,

"Connecting the Optional

Table of Contents