Wiring For Auxiliary Power - AT&T MERLIN LEGEND Release 3.1 Installation Manual

Installing Direct Station Selectors
Wall Jack
400B2 Adapter
Home
Menu
Figure 3–29. Wiring for Auxiliary Power
5 Turn the telephone and the DDS unit(s) face up with the telephone now to
the left of the DDS unit(s). See Figure 3–29.
6 Insert one end of the coiled H4DU handset cord into the handset and the
other end into the jack on the side of the telephone.
7 If auxiliary power is not required, plug the D8W cord into the wall jack
and then go to Step 9.
8 If auxiliary power is required, refer to the following steps and Figure
3–29. The combined total length of the D6AP and D8W cords you use
must not be more than 50 ft. (15 m).
a Plug the D8W cord from the telephone into the 8-conductor modular jack
of the 400B or 400B2 adapter.
3–46
Installing Telephones and Adjuncts
AC Power
Outlet
D6AP
D8W
MLX-20L
More
Inspct
Message
v
ABC DEF
Volume
1 2 3
Feature Transfer MNO
GHI JKL
4 5 6
HFAI Conf
PQRS TUV WXYZ
7 8 9
Mute Drop
OPER
#
Speaker Hold * 0
Power
Supply
DSS DSS