Replacing The Extension Label - AT&T MERLIN LEGEND Release 3.1 Installation Manual

Assembling MLX Telephones
Figure 3–36. Replacing the Extension Label
6 Replace the extension label and plastic cover.
a Insert one end into the slot and snap the other end into place. See Figure
3–36.
b If you are mounting an MLX-10, MLX-10D, or MLX-10DP wall telephone, go
to Step 7. If you are assembling a desk telephone, go to Step 8.
7 Wall mounting an MLX-10, MLX-10DP, or MLX-10D telephone.
a Turn over the telephone and remove the jack guard from the TEL/OTHER
jack area; set the telephone aside.
b Unpack the 630B Phonemount and remove the modular jack from the
backplate.
c Route the D8W cord (or DIW cable) through the hole in the backplate and
have it exit at the top of the backplate; leave 10 in. (25 cm) of cord to
connect the telephone. See Figure 3–37.
3–54
Installing Telephones and Adjuncts
555-1234
MLX-10
Volume ABC DEF
1 2 3
GHI MNO
Feature Transfer JKL
4 5 6
HFAI Conf
PQRS
TUV WXYZ
7 9
8
Mute Drop
Oper #
*
0
Speaker Hold