AT&T MERLIN LEGEND Release 3.1 Installation Manual page 220

Testing the System
8 Test telephones that are programmed for Night Service with Outward
Restriction.
a Pick up a handset on a restricted telephone and verify that outside calls
are not allowed.
b Using the password, make an outside call.
c Hang up the handset.
d Press the Recall button and dial the password. (On an MLX telephone
without a programmed Recall button, press the Feature button and dial
and the password before picking up the handset.)
e Pick up the handset and make an outside call.
f Verify that you have good two-way communication and hang up.
9 At the operator console, press the Night Service button again. If you used
a password in Step 1, enter the password again. Verify that the Night
Service LED turns off.
Testing the Dictation System
If dictation equipment has not been installed, skip this test. Place a call to
verify that you can access the dictation system.
To access the dictation system, follow the steps below:
1 At the test telephone, pick up the handset.
2 Dial the access code and the number associated with the dictation
equipment.
3 Verify that the ready tone is transmitted.
4 Test the transmission in both directions; make a recording and play it
back.
5 Hang up.
Testing the Paging System
To test the paging system, follow the steps below:
7–16
Initializing and Testing the System