AT&T MERLIN LEGEND Release 3.1 Installation Manual page 166

Connecting a Printer to the Control Unit
AT&T Call Accounting Terminal (CAT) Printer
AT&T Call Accounting System Printer
AT&T Applications Printer
NOTE:
The AT&T 570 printer is not compatible with the system.
Printer connection varies depending on the printer model, whether the printer
is grounded on the same AC outlet as the control unit, and whether the printer
is within 50 ft. (15.2 m) of the control unit. The procedures covered in this
chapter are described below:
If the CAT serial printer is used with a CAT and is grounded to the
same AC outlet as the control unit and is within 50 ft. (15.2 m) of the
control unit, refer to "Connecting a CAT and Printer on the Same AC
Outlet."
If the CAT serial printer is used with a CAT and is either not grounded
to the same AC outlet as the control unit or is more than 50 ft. (15.2 m)
from the control unit, refer to "Connecting a CAT and Printer on a
Different AC Outlet."
If the SMDR or CAT printer is within 50 ft. (15.2 m) of the control unit
and is connected to the same 117-V AC branch as the control unit,
refer to "Connecting a Printer Within 50 Feet (15.2 m)."
If the SMDR or CAT printer is more than 50 ft. (15.2 m) from the control
unit and is not connected to the same 117-V AC branch as the control
unit, refer to "Connecting a Printer 50 Feet (15.2 m) or More Away."
!
CAUTION:
Before touching leads, connectors, pins, and other components, wear a
properly grounded wrist strap, to prevent damage from electrostatic
discharge (ESD).
5–8
Installing the PC, CAT, or Printer