Table of Contents
Advertisement
Using a Tenant Table
To assign extensions to tenant IDs:
1.
Select Extension Configuration... on the Management menu to open
the Extension Configuration General window.
2.
For each extension you want to assign to a tenant ID:
a. In the Extension list, select and highlight the extension you want to
assign to a tenant ID. Each extension can be assigned to only one
tenant ID.
b. Select a tenant ID in the Tenant drop-down list under Personal
Information, then click Apply.
3.
Repeat the previous step for each extension you want to assign. When
you're done, click OK to close the Extension Configuration window.
To assign trunks to tenant IDs:
1.
Select Trunk Configuration... on the Management menu to open the
Trunk Configuration General window.
2.
For each trunk you want to assign to a tenant ID:
a. In the trunk list, select and highlight the trunk you want to assign to
a tenant ID.
b. Select a tenant ID in the Tenant Selection drop-down list, then
click Apply.
3.
Repeat the previous step for each trunk you want to assign. When
you're done, click OK to close the Trunk Configuration window.
Modifying the Tenant Table
To delete a tenant from the tenant window:
Highlight the ID number and click Delete.
If you delete a tenant ID that has been assigned to an extension or to a
trunk, the extension and trunk assignments are reset to N/A (no
assignment).
To edit the tenant name:
Double-click the name in the Tenant window (or select the name and
click Edit), then change the name in the dialog box that appears.
136 AltiWare OE System Installation & Administration Manual
Advertisement
Table of Contents
Troubleshooting
