Table of Contents
Advertisement
2.
Click Add to open the Add Service to Profile dialog box. Add
Microsoft Exchange Server, Outlook Address book and Personal
Folders to profile.
Figure 16. Add Services to Profile
3.
In the Microsoft Exchange Server dialog box that opens, type the
Exchange Server name in the Microsoft Exchange Server field and
the test mailbox name (e.g. AltiGen Assist) in the Mailbox field.
4.
Click Check Name. If you entered valid values, the names will be
underlined and the Check Name button will be grayed out. Click
Apply and then OK.
You will see Microsoft Exchange Server in the list in the Services
window.
5.
Optional: Select Microsoft Exchange Server in the list box, and click
Properties to see its configurations. The Microsoft Exchange Server
dialog box appears. If you need to, you can use this Properties dialog
box to change the name of Microsoft Exchange Server and Mailbox.
To Test the configuration:
1.
Restart Outlook 2000 at least once. Test the configuration by sending
an email, then check if you receive it.
2.
When the reboot is complete, log on using the AltiGen service account.
3.
Open Outlook, and from the Tools menu, select Services.
4.
Click Add and select Exchange Server. The Mailbox field should
already be populated with the Name entered above.
5.
Enter the Exchange Servers hostname and click the Check Name
button. Both the Mailbox and Exchange Server should now be
underlined.
AltiWare OE System Installation & Administration Manual
Data and Internet Integration
287
Advertisement
Table of Contents
Troubleshooting
