Setting Area Code Toll Definitions
•
10 Digit Dialing. Local calls that require dialing area codes but do not
require dialing 1 first.
•
1 + 10 Digit Dialing. Calls within the home area code that require 1 +
Area Code + Number.
Accessing Area Codes Setup
To access the Area Code window, select System Configuration... on the
Management menu, then click the Area Codes tab.
Figure 15. Area Codes window, System Configuration
Adding and Deleting Entries
To add entries to one of the three lists, click Add below the appropriate list
box. In the dialog box that appears, type a number and click OK.
To delete an entry, select it and click Delete. You can select multiple entries
for deletion by using Ctrl-click. Click Apply to save your changes and OK
to save and close the window.
128 AltiWare OE System Installation & Administration Manual
: