Altigen Altiware OE 4.5 System Administration & Installation Manual page 175

Configuring the Triton Analog Trunk LS/GS and LS Boards
Double click the board's icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 5. Board Configuration window (Triton Analog Trunk)
The Board Configuration window contains the following attributes:
Parameter
Board Info Group
Channel Mapping
List Group
Span Info
146 AltiWare OE System Installation & Administration Manual
Description
Board Logical ID: assigned by AltiServ
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window. See
"Triton Analog Trunk LS/GS and LS
Properties" on page 179.
Not available for Triton Analog Trunk LS/GS and
LS boards.