Altigen Board Options - Altigen Altiware OE 4.5 System Administration & Installation Manual

• Before installing AltiWare OE: on the root directory of the AltiWare
OE CD-ROM; this file will be installed when you install the software.
• After installing AltiWare OE: in the \AltiServ\SP directory on your
hard drive.

AltiGen Board Options

Table 2 lists the AltiGen telephony board modules. This selection allows
you to optimize your system based on the trunk/extension mix required at
your site.
Table 2. AltiGen Telephony Board Options
Board Model Number
Quantum ALTI-CD0408UD-
SPH001
Quantum ALTI-CD0804UD-
SPH001
Quantum ALTI-CD0012UD-
SPH001
Quantum ALTI-DID0408UD-
SPH001
Triton ALTI-TTAS-12
Triton ALTI-TTIP-4
Triton ALTI-TTIP-8
Triton ALTI-T1E1
Triton ALTI-TTRS
Triton ALTI-TTAT-12GS
Triton ALTI-TTAT-12
When you upgrade to AltiWare OE 4.5, all 8-port boards are automati-
*
cally upgraded to 12-port boards. With a 30-port upgrade license, the 12-
port board can be upgraded to a 30-port board (one board upgrade per
license). The original ports retain their configurations, but you must con-
figure the new ports if you want to use them
34 AltiWare OE System Installation & Administration Manual
Description
4 trunks and 8 extensions
8 trunks and 4 extensions
12 extensions
4 DID trunks and 8 extensions
12 extensions (stations)
4 VoIP trunks or extensions
12 or 30 VoIP trunks or
extensions*
1 T1, 1 E1 or 1 PRI
12 ports for supervisor monitoring
12 trunks, ground start/loop start
12 trunks, loop start only
.