Altigen Altiware OE 4.5 System Administration & Installation Manual page 301

Setting Up Email Service
2. Click the Protocols tab, then double click on TCP/IP Protocol from
the drop-down list box. The TCP/IP Protocol window appears (see
Figure 2), where you configure the IP Address, Subnet Mask, and
Default Gateway (router).
Figure 2. TCP/IP Configuration
• IP address—enter the assigned IP address (from the block of IP
addresses obtained from your ISP) to the AltiServ.
• Subnet Mask—enter the Subnet Mask obtained from your ISP.
• Default Gateway—enter the email Gateway (the router address).
3. Select the DNS tab at the top of the TCP/IP Properties window (see
Figure 3) to configure Domain Name System.
Note: You must configure the DNS tab if you want to exchange
email through the Internet.
Configure the following:
• Host Name—enter the name of the server (for example: melody)
• Domain—enter the domain name (for example: altigen.com)
• DNS Service Search Order—enter the IP address of either your
own or your ISP's Domain Name Server.
272 AltiWare OE System Installation & Administration Manual