Table of Contents
Advertisement
— Lock the wall box-switch in the off position.
— Attach a DO NOT OPERATE tag to the wall box-switch.
•
Never assume that the power is turned off. Always check to ensure that
a circuit does not have power.
Note: Unit must have ground wire attached if trunks are attached
and system is unplugged.
•
Do not work alone. Work with another person who knows the
locations of the power-off switches, especially if you are working with
exposed electrical circuits. (See note above.)
•
Follow the instructions in the manual carefully, especially when
working with circuits that are powered. Disconnect power when
instructed to do so in the procedures.
•
Disconnect all power before working near power supplies unless
otherwise instructed by a maintenance procedure.
•
Disconnect all power before installing changes in machine circuits
unless otherwise instructed by a maintenance procedure.
•
High voltages capable of causing shock are used in this equipment. Be
extremely careful when measuring high voltages and when servicing
cards, panels, and boards while the system is powered on.
•
Do not wear jewelry or other metal objects when working on the
equipment.
•
When possible, work with one hand so that a circuit is not created.
•
Use caution when installing or modifying telephone lines. Never
install telephone wiring during an electrical storm.
•
Never install a telephone jack where it can get wet unless the jack is
specifically designed for wet conditions.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
UL Regulatory Safety Requirements
Host Computer
1.
Model AltiGen/AltiServ apparatus is approved for connection to
Telecommunications Systems specified in these instructions for use
AltiWare OE System Installation & Administration Manual
Liability & Warranty
xix
Advertisement
Table of Contents
Troubleshooting
