Fiery 750DP - Phaser Color Laser Printer Administration Manual page 98

4
4-5 Troubleshooting the Fiery SI
After this Setup screen:
Add Server, Enter Your Login
Name, Enter Your File Server
Password
Any IPX (Novell) setup screen
This message:
No NetWare print
server found.
Novell error code, followed by
a message.
In the Network Setup, when you are configuring your IPX (Novell) connection, the
Fiery SI queries the network for Novell file servers and print servers, and attaches to
them temporarily. If a guest login is enabled, it will be used. If not, you'll be prompted
to log in from the Fiery SI Control Panel.
If the selected NetWare file server does not have a guest account, or if the guest account
has expired or has been disabled by the NetWare supervisor, you will be prompted to
notify the IPX (Novell) administrator. In that case, you (or the supervisor) have two
options:
• Enable a guest account on the NetWare server for the purpose of setup.
• Log in to a different account. At the
name ( ) to
guest supervisor
prompted for a password, enter the correct password for the account you named.
For any Novell error, make sure your IPX (Novell) network is connected to the
Fiery SI, the server you are trying to access is running, it has been configured with a
print server and queue for the Fiery SI, and you have the appropriate permissions. On
Ethernet networks, make sure the IPX (Novell) server is using the same Ethernet frame
type you have set on the Fiery SI in Network Setup.
Means:
No print server was found when Fiery SI queried the file
server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle Fiery SI print
jobs (see page 3-4).
Novell NetWare has reported an error. The Control Panel
reports the error number and displays a brief explanatory
message.
For the most common errors (listed in the following table),
a screen is displayed that enables you to retry the action
that evoked the error, such as adding a server. If that is not
possible, you are prompted to notify the Novell administra-
tor, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for further
explanation of Novell error codes.
ENTER LOGIN NAME
or enter another valid login name. When you are
screen, change the default