Chapter 2: Setting Up The Fiery Si; Fiery Si Setup - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2

2-1 Fiery SI Setup

Chapter 2:
Setting up the
Fiery SI
The Fiery SI Color Server fits into a variety of work environments. To prepare for
printing at your site, you need to do some initial configuration to specify the network
environment and the kind of printing you will do.
Fiery SI Setup
Setup is required the first time the Fiery SI is powered on after new system software is
loaded. In this first-time setup you (or the service technician who loads the software)
choose the language you want to use for Control Panel screens.
For the first-time setup, the server, network, and printer have to be set up from the
Control Panel, in that order. Aside from choosing your copier or printer model, default
settings are adequate for this setup although they may not be optimal. After you
become more familiar with your options you can reset them according to your network
and user environment.
On IPX networks and on some TCP/IP networks, the network servers should be
configured for printing to the Fiery SI before you enter network settings on the
Fiery SI. The diagrams on pages 1-5 through 1-10 give chapter references for network
server setup.
You'll need a live network connection so the Fiery SI can query the network for zones,
servers, and server-based queues.
Whenever the configuration of servers, printers, or the network itself changes at your
site, you can alter individual settings to correspond to the changed environment. Like-
wise, if printing needs or administrative requirements change, you can alter the corre-
sponding settings.
Changing network or port settings may require that you make changes in more
N :
OTE
than one setup area.