Runtime Error Messages - Fiery 750DP - Phaser Color Laser Printer Administration Manual

4
4-8 Administering the Fiery SI
After this Setup screen:
Attached IPX File Servers
Publish Hold Queue
Messages you might see in Printer Setup are described in the following table.
Printer Setup messages
This message:
Unattached file You have set up at least one configuration (NetWare File Server/
server detected.
NetWare Print Server/Poll Interval) in Network Setup that you
have not yet selected in Printer Setup.
You must attach the NetWare file server to a copier or printer, and
select a Fiery SI connection (Direct, Print queue, or Hold queue)
for it. Repeat the process for each NetWare file server you added in
Network Setup.
You must publish a You have selected No to the options ( Publish Direct Connection,
connection (Direct,
Publish Print Queue , and Publish Hold Queue ). You must choose
Print, Hold) first.
Yes
Choose
load files or fonts using the Fiery XJ Downloader. Choose
Publish Print Queue if you intend to use the remote utilities to
manage jobs on the color server.

Runtime error messages

For canceling jobs, calibration alerts, and error messages related to printing and
calibration, see the User Guide.
Check power and cable
This message on the Control Panel indicates that the interface cable between the
Fiery SI and the copier is not connected, or a print job is ready but the copier is not
turned on.Depending on the copier or printer model, the runtime diagnostics Test
Scan/Print, Video Diagnostics, and Cable Check may be available for service
technicians.
See the User Guide for additional runtime error messages, including copier or printer
errors, alerts to load media in trays or cassettes, and a disk full message. These messages
are reported by the Control Panel and the remote Fiery SI utilities.
Means:
for at least one of these options.
Yes
for Publish Direct connection if you intend to down-
Yes for