Fiery 750DP - Phaser Color Laser Printer Administration Manual page 50

2
2-26 Setting up the Fiery SI
Cable to Novell File Server
Ethernet/Token Ring [Ethernet]
This option appears only if both IPX (Novell) and token ring were enabled in Network
Setup, and if the selected Novell file server has both Ethernet and token ring cabling.
Specify the network cabling that will be used between the selected file server and the
Fiery SI.
Select Connection for File Server 1
Print queue/Hold queue/Direct connection
Select the Fiery SI connection that should be used for jobs originating from the named
file server. Only the connections that you published earlier in Printer Setup are dis-
played as choices. If only one connection is published, you will not see this question.
You must select a connection here for each file server you added in Network
N :
OTE
Setup if you want all NetWare clients to be able to print or connect to the Fiery SI.
Attach another File Server?
Yes/No [No]
This option is only displayed if there is still an unattached server. If you select
Attach Novell File Server
you are prompted to select the connection for that server from among the published
connections.
You can attach a maximum of 16 NetWare file servers to Fiery SI queues (a maximum
of eight over Ethernet, eight over token ring).
Parallel Connection
Print Queue/Hold Queue
Use this option to determine whether jobs printed to the parallel port are sent to the
Print queue or Hold queue. Only the queues that you published are displayed.
This option appears only if you selected
Setup.
If only one of the queues is published, this option does not appear and parallel
N :
OTE
port jobs are automatically printed to that queue.
screen is displayed again. After you select another file server,
Enabled for the
Yes , the
Parallel Port option in Server