Stages Of Installation On The Network - Fiery 750DP - Phaser Color Laser Printer Administration Manual

1
1-2 Connecting to the Network

Stages of installation on the network

Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
• Physically connecting the Fiery SI to a functioning network
Prepare a network node for the Fiery SI—obtain cable and route it to the location
where the Fiery SI will be installed (near the copier), and attach the cable to the net-
work interface of the Fiery SI. See page 1-11 for details.
• Configuring the network server
When network servers are required, you need to configure those servers to provide cli-
ent access to the Fiery SI as a color PostScript printer. See Chapter 3 for configuring
network servers in Windows and UNIX network environments.
• Fiery SI Setup
Configure the Fiery SI for your particular printing and network environment. See
Chapter 2 for details.
• Client setup
Install the files needed for printing, install additional user software, and connect the
client to the network. These steps are described in Getting Started, and some informa-
tion is provided in Chapter 3 of this manual.
• Job administration
You can track and manage print jobs when networked users print to the Fiery SI. See
Chapter 4 for details.