Installing The Fiery Si As A Postscript Printer - Fiery 750DP - Phaser Color Laser Printer Administration Manual

3
3-22 Setting up network servers
T
O INSTALL THE
1. On the computer acting as a print server to network clients, install the printer driver
2. In the Create Printer dialog box, check Share this printer on the network.
(Name of driver you installed)
3. Enter the Share name of the printer.

Installing the Fiery SI as a PostScript printer

The first step in creating a printer is installing the Windows NT PostScript printer
driver and the Fiery SI PPD (PostScript printer description), which gives your
applications access to some copier or printer features.
The installation instructions in Getting Started can be used for every workstation that
will print directly and independently to the Fiery SI. However, if you are an
administrator running Windows NT Server or Windows NT Workstation, you can
share a printer you created with clients on the network. When a printer is shared,
clients who are not able or are not given permission to establish an independent
network connection to the Fiery SI have to print through the server.
F SI
IERY AS A SHARED
and printer file as described for Windows NT clients in "Setting up Windows NT Print-
ing" in Getting Started.
This entails creating an installation floppy disk, and using it together with the
Windows NT Installation CD to install the Windows NT PostScript printer driver
and the Fiery SI PPD.
Use a name that indicates the Fiery SI queue if you wish to publicize that information.
W NT P S
INDOWS OST CRIPT
P :
RINTER
(Name you gave to the printer)
Enter a share name here