Fiery 750DP - Phaser Color Laser Printer Administration Manual page 102

4
4-9 Troubleshooting the Fiery SI
In this location:
Server Setup on Fiery SI Control
Panel
PostScript error reporting can be turned on as a print option from Macintosh applica-
tions that use a PostScript Level 2 driver or by choosing the Printer Setup option
.
to PS error
Printer not found—TCP/IP or IPX networks
Most failures to find a printer on the network are due to conflicting or missing name or
address settings for the printer/server. You must enter particular names in certain
places. The required names are:
• TCP/IP host name or DNS name, which is defined by the MIS group in your
organization, and should be fewer than 10 characters long. In this manual we use
.
colorsvr
Enter the host name as the Server Name on the Fiery SI Control Panel and in the
NET_WSCK.INI file.
• Internal (machine) name in the form:
queue_devicename
TCP/IP printing protocols use this name to find the physical device. Use the device-
name part of this internal name in the NET_WSCK.INI file.You must enter the
names that are defined for your copier model; they are listed in Getting Started and
the User Guide.
Make sure you update the NET_WSCK.INI file if you change the TCP/IP host
N :
OTE
name or DNS name of the Fiery SI.
Check the table below for the appropriate name to use.
For this item:
Server Name option
IPX/SPX TCP/IP
networks: networks:
User-selected User-selected
name name
Print
See page:
2-8