Job Log Setup Options - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2
2-30 Setting up the Fiery SI
Job Log Setup
Calibration
Change Password
Clear Server
Setup
Scroll the main setup menu to choose Job Log Setup.
Enter the options as described below. When you have finished, save changes.

Job Log Setup options

Default values for the following options, where applicable, appear in square brackets.
Auto Print Job Log Every 55 Jobs
Yes/No [No]
Use this option to specify whether you want the Fiery SI to print the job log after every
55 jobs. If accounting for each printed page is important at your site, and an adminis-
trator checks the printed output, set the Job Log for automatic printing.
Auto Clear Job Log Every 55 Jobs
Yes/No [No]
Use this option to specify whether to clear the job log after every 55 jobs. This option
is only available if you selected
If you do not enable this option, and do not clear the job log from the Fiery XJ, the
Fiery SI saves a record of all jobs.
Note that the job log (together with all queued jobs) is cleared when you choose Clear
Server from the main setup menu. It is also cleared when a new version or copy of
color server system software is installed on the Fiery SI.
Job Log Page Size
Tabloid/A3 Letter/A4 [Tabloid/A3]
Select the paper size for printing the job log. Fifty-five jobs are listed on a page, regard-
less of page size. The paper size used depends on the
Printer Setup. If the
Default Paper Sizes
or letter size paper, with tabloid the default.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Job Log Setup; select
main setup menu without making any changes.
for the option to print the job log automatically.
Yes
Default Paper Sizes
setting is , the job log is printed on tabloid
US
setting in the
No to return to the