Fiery 750DP - Phaser Color Laser Printer Administration Manual page 58

2
2-34 Setting up the Fiery SI
Apply/Overwrite Calibration?
Yes/No [Yes]
Choose if you are satisfied with the calibration shown in the comparison page. The
Yes
newest calibration overwrites any previous one.
Choose if for any reason you are not satisfied; you return to the main Calibration
No
setup screen.
This affects all users. Continue?
Yes/No [Yes]
This is a reminder that calibration is a global setting; if you overwrite calibration, every
print job is affected by the new calibration.
If you choose
setup screen. If you are finished, choose
If you choose
tion setup screen.
Remove Calibration
Choose Remove Calibration when you wish to return the printer to its uncalibrated
state. You do not need to remove a calibration before applying a new calibration.
This affects all users. Continue?
Yes/No [Yes]
This option is a reminder that calibration is a global setting; if you remove calibration,
every print job is affected by your action.
If you choose
bration setup screen. If you are finished, choose
reboot to continue.
If you choose
bration setup screen.
, calibration is overwritten and you return to the main Calibration
Yes
Exit Calibration
, calibration is not overwritten, and you return to the main Calibra-
No
, the current calibration is removed and you return to the main Cali-
Yes
, the calibration is not removed, but you still return to the main Cali-
No
.
. The Fiery SI must
Exit Calibration