Fiery 750DP - Phaser Color Laser Printer Administration Manual page 52

2
2-28 Setting up the Fiery SI
Print to PS Error
No/Yes [No]
Use this option to specify whether the Fiery SI should print the available portion of a
print job when it encounters a PostScript error. Select Yes to print the portion of the
job that was processed before the error occurred; select No to cancel the print job
entirely when a PostScript error is encountered. We recommend leaving this option at
unless you encounter printing problems.
No
Copier- or Printer-specific default settings
Please refer to the Appendix of the User Guide for an explanation of default settings
that may be available for your model of copier or printer, and the situations in which
you can override them. Only enable default settings that will be acceptable to most
users, as some systems (UNIX, Windows NT, DOS command line) will not permit
users to change all the settings for individual jobs.
Save Changes
Yes/No [Yes]
Select to activate any changes made in the Printer Setup; select to return to the
Yes No
main setup menu without making any changes.