Fiery 750DP - Phaser Color Laser Printer Administration Manual page 31

2
2-7 Fiery SI Setup
If you make a mistake during setup, you can always use the Menu button to
N :
OTE
cancel without saving changes. If you are viewing a setup screen, pressing the Menu
button cancels what you are doing in the current screen to bring you to the next higher
level menu. You can start the current setup again, or exit without making changes.
When you have entered all the settings or made all the changes you want, you need to
save the changes. For most setups, a screen prompts you to save changes. When you
finish Network Setup for all the protocols you use, choose
prompted to save changes. If you choose
If you choose
exit from the Setup menu.
, your previous settings are retained. The Fiery SI reboots after you
No
Exit Network Setup
, your settings overwrite previous settings.
Yes
; you are