Server Setup Options - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2
2-8 Setting up the Fiery SI

Server Setup options

The Server Setup menu enables you to specify system information that pertains to the
Fiery SI itself and all users. Accessing the Control Panel Setup menu is described on
page 2-2.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
When you choose Server Setup, the options appear in sequence, as described below.
Default values, where applicable, are shown in square brackets.
Server Name
Default server name
Use this option to give the Fiery SI a name (up to 10 characters long). This is the name
that will appear in the Chooser on an AppleTalk network.
Also enter this name as the section name [Server1] for this server in your
NET_WSCK.INI file for IPX/SPX on Windows 95 (see Getting Started). The same
name will then appear in the Chooser of the Fiery SI utilities.
If you have multiple color servers and give them the same name, a unique number is
appended to the name that appears in the Chooser. Although this routes jobs correctly,
it may be inconvenient to users and is not a recommended practice.
System Date
MM/DD/YY
Use this option to change the system date. The date is entered in the form
(Month/Day/Year) in all languages. The date is used on the cover page and
MM/DD/YY
on job logs.
System Time
HH:MM
Use this option to change the system time. Enter the time based on the 24-hour clock
in the form
HH:MM
job logs.
Press button for Server Setup
(Hours:Minutes). The time is used on the cover page and on