Token Ring Setup Options - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2
2-19 Network Setup options
Network Setup
Token Ring Setup

Token Ring Setup options

This setup can be used only if your system has the Token Ring option installed. Token
ring networks used with the Fiery SI use IPX protocols. After enabling token ring and
selecting the maximum frame size, you continue with IPX (Novell) Setup. You can set
up a maximum of eight token ring connections, but you have to configure a different
NetWare file server for each token ring connection.
Enable Token Ring Yes/No [No]
Select if you use token ring. When you select
Yes
ring hardware configuration.
Maximum Frame Size (bytes)
632/4216/17690 [4216]
Select the maximum size (in bytes) of the data frame along the token ring network. In
general, you should leave this at the default
change the value.
The Fiery SI configures the token ring hardware, and then displays the IPX (Novell)
menu (page 2-14). The options are the same as for IPX on Ethernet networks, except
that the NetWare Server Poll Interval
From the IPX (Novell) menu, choose
When you have connected all the servers you have configured for the token ring net-
work, choose another IPX (Novell) Setup option or choose
proceed to Printer Setup.
, the Fiery SI verifies the token
Yes
4216 . If your network requires it, you can
does not apply to token ring networks.
. See page 2-15 for details.
Add File Server
Exit Network Setup
and