Fiery 750DP - Phaser Color Laser Printer Administration Manual page 104

4
4-11 Troubleshooting the Fiery SI
• Fiery SI Setup—you must have enabled the appropriate network protocol, entered
the correct parameters (for example, for TCP/IP, the IP address, etc.; for IPX, the
Ethernet frame type setting), and you must have published the Print queue.
You can check these settings quickly by printing a configuration page.
• On your workstation—you must have the appropriate network protocol(s) loaded,
your Windows directory should contain your edited NET_WSCK.INI file, with the
correct name entries as summarized in the table above, and your System folder
should contain only one of the following files:
NET_WIPX.DLL
NET_WSCK.DLL
• If you are running the utilities over IPX/SPX, make sure the NET_WSCK.INI file
contains the correct Ethernet or token ring IPX address of your color server.
if the workstation is running IPX/SPX protocols, or
if the workstation is running TCP/IP protocols.