Printer Setup Options - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2
2-23 Network Setup options
1. In the main setup menu, choose Printer Setup.
Exit Setup
Server Setup
Network Setup
2. Enter the options appropriate to the printing requirements at the site and the network
Printer Setup
Setup
3. When you have finished, save changes.

Printer Setup options

Printer Setup configures the connections and printing behavior associated with a
particular printing device.
protocol or protocols you use.
Printer Setup includes:
• Specifying the copier or printer model
• Publishing the Direct connection and Print and Hold queues
• Specifying the printer's defaults. Setting these defaults is particularly important for
systems that don't transmit printer options or overrides from applications to printers
(for example UNIX, the DOS command line, and systems that use PostScript
Level 1 printer drivers).
• For IPX (Novell) networks, specifying a connection (Direct, Print queue, or Hold
queue) for each Novell file server that is supported
• Specifying the Fiery SI connection for parallel jobs when a parallel connection is
enabled
In the list of options that follows, default values, where applicable, appear in square
brackets.
Printer Model
[Model name]
Use this option to specify the model of copier or printer connected to the Fiery SI.
This option appears if more than one model is supported by the software and the cur-
rently selected video card on the server.