Setting Up A Fiery Si Print Queue - Fiery 750DP - Phaser Color Laser Printer Administration Manual

3
3-9 Overview of IPX printing to the Fiery SI
T
O ACTIVATE THE BINDERY CONTEXT
1. If you cannot reboot the NetWare server at this point, type the
at the server's colon prompt.
Use the same command as you entered in the
ous procedure).
2. If you can reboot the NetWare server, the
You are ready to set up the Fiery SI print server and print queue. See the next section
for details.

Setting up a Fiery SI print queue

For both NetWare 3.1x and 4.x versions, the NetWare print server and print queue for
Fiery SI are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in NetWare's PUBLIC directory.
T N W
O SET UP A ET ARE SERVER FOR PRINTING TO THE
1. Log in to the NetWare server as the Supervisor.
2. At the NetWare MS-DOS prompt, type
If you are using NetWare 4.x, PCONSOLE has two modes. Press the F4 key to
N :
OTE
switch to Bindery mode. If you are using NetWare 4.x, choose Bindery mode for
PCONSOLE.
The Available Options menu is displayed.
3. Choose Change Current File Server and press Enter.
:
AUTOEXEC.NCF
set
command is loaded automatically.
F SI:
IERY
pconsole
.
set
command manually
file (in step 7 of the previ-