Configuring Windows 95 Workstations For Remote Utilities - Fiery 750DP - Phaser Color Laser Printer Administration Manual

3
3-14 Setting up network servers
Configuring Windows 95 workstations
for remote utilities
To run the Fiery SI utilities, a Windows 95 workstation on an IPX network must have
IPX/SPX protocols loaded and bound to the network driver. There should be a
NetWare server on the network.
Follow the steps below to install the utilities on a single workstation and save a
configuration file that can be provided to other users on the network. Installing the
utility software is also described in Getting Started.
T
O INSTALL REMOTE UTILITIES AND PREPARE AN INSTALLATION DISK
1. Configure your NetWare server and perform Fiery SI Setup.
2. In Network Setup, under Ethernet Setup, perform IPX (Novell) Setup and save changes.
Enabling IPX (Novell) automatically enables the communication for the Fiery SI utili-
ties.
3. Print a Fiery SI configuration page. (From the Functions menu on the Fiery SI Control
Panel, choose Print Pages, and choose Configuration.) Find the IPX Ethernet or IPX
Token Ring address and record the address exactly.
4. Insert the Fiery SI User Software media in your Windows 95 workstation and follow the
instructions for installing utilities in Getting Started.
5. When the Installer prompts you to select a network protocol, select SPX.
This choice installs the applications in a folder of your choice and installs a
NET_WIPX.DLL file into the active System folder.
NET_WIPX.DLL is the NetLayer dictionary that the utilities need in order to run
with IPX on Windows 95. You don't change this file.
6. When you are prompted to find the NET_WSCK.INI file, click Next.
The Installer copies the unconfigured file to your Windows directory.
NET_WSCK.INI, after you edit the sample file provided, registers your network num-
ber, the particular Fiery SI, and the copier(s) or printer(s) connected to the Fiery SI.
: