Configuring Windows Nt Clients - Fiery 750DP - Phaser Color Laser Printer Administration Manual

3
3-24 Setting up network servers
Configuring Windows NT clients
Each client of a Windows NT server is already using a network protocol to
communicate with the server. Each client can print to the Fiery SI if it has been shared
by a Windows NT Server or Windows NT Workstation computer. In that case the
client does not have to use the same network protocol to connect to the Windows NT
server as the server uses to communicate with the Fiery SI.
T
O CONNECT AND PRINT TO THE
1. Before printing:
Windows 95 clients
Neighborhood window, and double-click the printer name. You will be prompted to
set up the printer. When you choose to set it up, you'll see the Add Printer Wizard.
Follow the steps in Getting Started.
Windows NT Workstation clients
choose Connect To Printer. Select a printer from the Shared Printers list, or double-
click a network, workgroup, or server icon to show additional printers.
2. After clients have selected the printer, they can choose it from the Print Setup, Page
Setup or Print dialog box of their application.
Clients can change printing options for their own job, but printer properties are grayed
and not available for changing. When a client chooses Print, the job is transmitted to
the Windows NT print server, and from there to the selected queue on the Fiery SI.
The job is listed in the Print Manager on the client workstation, and the administrator
can track it in the Fiery SI window in the Print Manager on the Windows NT print
server.
F SI
IERY SHARED BY THE
—Double-click the Windows NT server icon in the Network
—Open the Print Manager. From the Printer menu,
W NT :
INDOWS SERVER