Fiery 750DP - Phaser Color Laser Printer Administration Manual page 68

3
3-8 Setting up network servers
6. On the menu of available NCF files, select Edit AUTOEXEC.NCF file.
7. Type a new line anywhere in the file as follows:
set Bindery Context = O=xx
Instead of
N :
OTE
(In this example from a relatively simple directory structure, the Bindery Context is
"TS".) Also note that O in this line is the letter O, not the digit zero.
8. Press Esc to close the window, and save changes.
9. Proceed to the next section to activate the bindery context.
xx , type the bindery context obtained from the system administrator.